Lindhaus Central Vacuum | Shop by Brand

Replacement Beam Serenity wand for the Beam Serenity central vacuum power head. This wand will work with Beam Serenity central vacuum power heads that have the cord coming out of the back of the power head, as opposed to the new style with the cord integrated into the neck.

The Lindhaus PB12 is one of the most advanced central vacuum power nozzles on the market today. Purchase one today for years of worry free performance. The compact design of he PB12 allows you to get in and around some of the tightest spots in your house. Great for plush and dense carpeting. Get yours today from Central Vacuum Direct.

The Lindhaus PB14 is one of the most advanced central vacuum power nozzles on the market today. Purchase one today for years of worry free performance. Its 15" wide cleaning path allows you to cover more ground in a single pass helping you get the job done faster. Great for plush and dense carpeting. In stock at Central Vacuum Direct.

Replacement Poly-v belt for the CT14DXQD, CT18DXQD, and CT18DXQS Cen-Tec power nozzle nozzles. The part number stamped in white on the belt is 5PH288. These belts are long lasting and are reinforced for maximum lifespan.  Available from Central Vacuum Direct.

Replacement Lindhaus PB14 Transmission. Solidly made to last as well as the original.

The brush pulley easily mounts on the transmission of the Lindhaus PB14 central vacuum power nozzle. Available from Central Vacuum Direct.

Genuine Lindhaus handle release pedal for the PB14 central vacuum power nozzle. This handle release foot pedal helps keep your PB14 powerhead standing upright. Available from Central Vacuum Direct.

Rear wheel for the Lindhaus PB14.  Made from high quality rubber with metal insert and bushing.

This front bumper is made for the Lindhaus PB14 from high quality rubber and will protect your furniture and baseboards from damage.

This Lindhaus PB14 central vacuum brush motor is made in Italy with the highest quality components available delivering a long-lasting efficient product. Available from Central Vacuum Direct.

This channel cover is for the Lindhaus PB14 and is a genuine part..

This swivel connector is made for your Lindhaus PB14 as well as other Lindhaus power heads and is made from high quality plastic.

This base housing is made for the Lindhaus PB14 as well as other power heads and is made from high quality plastic.

Side Brush Roll cover for the Lindhaus PB14.

Genuine Lindhaus PB14 central vacuum power nozzle brush roll with hex end drive mechanism. The last two pictures will show the two color variations on the hex drive. Please note that this brush roll has been referred to as a 14" and a 15". The end cap for this brush can be found here.

Lindhaus PB14 central vacuum power nozzle Roller Support. Available now at Central Vacuum Direct.

Replacement front wheel for Lindhaus PB14 central vacuum powerheads. Quality made from non-marring rubber. Available from Central Vacuum Direct.

This front axle is made from high quality steel and is the exact replacement part for your Lindhaus PB14.

This durable replacement belt for the Lindhaus PB14 is made from the highest quality materials.

Replacement belt for the  CT210QD Power nozzle.

This replacement belt for the CT24QD power nozzle is easy to install.

Replacement Belt for the CT20DXQD, CT20DXQS, and CT23QD Cen-Tec power nozzles. This power nozzle was manufactured for several different companies, so it may be listed under a different name.

Great for bare floor and rug cleaning. The Air Turbine Deluxe Rug & Floor pack has all the essentials to dust, clean light rugs, bare floors, upholstery, and crevices. The light-weight 30' hose has a 360 degree swivel in the handle and has an on/off switch.

Genuine Lindhaus PB12 and PB14e, Pro, and Stealth central vacuum power nozzle neck joint assembly complete with cord.

Genuine Lindhaus PB14 end cap with bearing for brush rolls with "T" drive shaft.

This replacement brush roll is the most important part of your Lindhaus power nozzle. . Over time the bristles on the brush roller will either get worn down or get soft. Once this happens, the overall powerhead performance deteriorates. With this new brush roller, you will have your powerhead running good as new.

Replacement Roller Brush for following power head models:

Lindhaus 500
Lindhaus PB20E
PB17

Genuine Lindhaus PB12e and PB14e direct connect central vacuum power nozzle neck joint assembly complete. Will fit the Lindhaus central vacuum power nozzle models PB12e, PB14e, Aria, Ecoforce PB12QR, and Ecoforce PB14QR. This neck is used for direct central vacuum connect power nozzles that have the wiring integrated into the wand and features a quick release pedal to quickly remove the wand for attachment cleaning. manufacturers part number is 087770380.

Genuine Lindhaus and Stealth PB14 brush roll with T-drive mechanism. Please see the additional picture with the drive mechanism. This brush roller will have a metal drive shaft that runs through the brush roll and has a "T" shaped drive that slides into the roller. The end cap for this brush roll can be found here.