Shop By Brand | Electrolux | Powerhead Parts

Replacement Beam Advocate and Solaire Belt. Will work on select Electrolux, Eureka, and Honeywell power nozzles as well.This genuine Beam Advocate belt is geared and reinforced.

Replacement Beam Advocate and Solaire Motor power nozzle. Motor has a geared axle for a cogged belt and is very easy to change out. Homeowners with very basic do-it-yourself skills can easily repair this power head. Old manufacturers part number was 155209. Available from Central Vacuum Direct.

Genuine replacement Beam Advocate Brushroll.  This brushroll has high quality bristles that deeply agitate carpet for a cleaner home.

Replacement Beam and Electrolux telescopic wand for the Beam Advocate. Imperial, Electrolux EXL1250, and EXL1350  power nozzles. This wand is steel and comes with attached cord. EZ change release makes it possible to switch quickly from the power head to any other attachment.

This is a genuine replacement Beam Imperial Neck Assembly for the Beam Advocate, Imperial, and Solaire power heads.  Assembly does not include any wiring.  This is the plastic neck assembly only.

Replacement Beam EZ Change Lower Wand New Style 2 Prong for the new style Beam Rugmaster power head. This wand has the same EZ-change assembly, but has 2 prongs instead of 3.

This replacement Beam EZ Change Neck Assembly was common on some Beam Rugmaster, Imperial, Solaire and Advocate power heads, but was also installed on other versions of various brands including the Eureka CV205. If you are unsure if this is the part you need, feel free to contact us.

Genuine Beam central vacuum  EZ Change quick release power nozzle cord for the Beam EZ Change quick release system.  The pronged end rests in the EZ Change neck coupler,  while the wires are connected internally in the power nozzle.  Available from Central Vacuum Direct.

Genuine main printed circuit board. Will fit the following central vacuum power nozzle models:
Beam: Q100 and Q200
Electrolux: EL7, EL10, EL11A, EL12, EL13A EL7061, EL6988E, EL7057, and ELUX1600

Secondary PCB for Beam Q100, and Electrolux EL7061, EL6988E, and EL7057 central vacuum power nozzle models.

Genuine replacement Beam Q Brushroll with Bottom Plate for the Beam Q powernozzle.  This Beam Q brushroll has high quality bristles that agitate the carpet to clean deeply.  Kit comes with brushroll, replacement belt, and bottom plate.

These Beam Q Foot Pedals are for the Beam Q power head.  Kit comes with both foot pedals and necessary springs.

Replacement Beam Q Height Adjustment.  This central vacuum part installs into the new Beam Q style power nozzle and adjusts the height of the brush.  This is a replacement part only.

Genuine Beam Q central vacuum power nozzle motor. Will fit the following central vacuum power nozzle models:
Beam: Q100 and Q200
Electrolux: EL7, EL10, EL11A, EL12, EL13A EL7061, EL6988E, EL7057, and ELUX1600
Available from Central Vacuum Direct.

This is the genuine neck assembly for the new style Beam Q100 and Electrolux Quiet Clean central vacuum power heads with the "sumo" fitting. It is oval at the top, as opposed to the old round style power heads. Designed for use in the Beam Q100 (045056) and Electrolux Quiet Clean (045059) power nozzles.

Genuine Beam Q sumo fitting telescopic central vacuum wand. Will fit the following central vacuum power nozzle models:
Beam - Q100 (045056,) SL100 (045055)
Electrolux - EL7, EL10, EL12, EL13A, ELUX1600 EXL103A,EXL1250, EXL1350, and Quiet Clean (045059) power nozzles
Eureka - E1403EZS, ECP700E, ECP750E, and EL101A
Honeywell - HL102A

Easily replace the Beam Solaire Bottom Plate. This is a genuine Beam replacement part made for the Beam Solaire. This part will clip in where broken bottom plate is. ***Service Tip: If you hover you cursor over the picture and your old bottom plate has five tabs (Imperial and Advocates) you will need to shave off the center tabs of the replacement plate, and then half off of the outer half of the tabs next to the center most tabs for the new plate to fit. The five tab plate has been discontinued.***

Replacement Beam Solaire LED PC Board with wire for the Beam Solaire central vacuum power nozzle. This particular PC board is located within the housing and can be replaced by a do-it-your-selfer.

Genuine Beam Solaire power head neck for the new style Beam Solaire central vacuum power head. It is oval at the top and uses the "Sumo" attachment fitting, as opposed to the old round universal size Beam Solaire.

Rear Wheels for the Beam Solaire and Advocate central vacuum power nozzles. Will also work on Electrolux EXL103A, EXL1250,  EXL1350, Eureka E1403EZS, ECP700E, ECP750E, and Honeywell HL102A models as well.These are genuine Beam central vacuum parts.

The BEAM Sumo to round attachment adapter is designed to change Sumo wands or attchments to the round neck design.
Fits Sumo D-shape; for air attachments only.

Premium replacement brush roll for Electrolux central vacuum power nozzles. This brush is made with spiral bristles which cause dirt and debris to be pushed to the air channel and increase effectiveness. Will fit the following models: Discovery, Advantage, Epic, N106M, Prolux uprights, and PN5, PN6 canister power nozzles. Available from Central Vacuum Direct.

Electrolux central vacuum power nozzle neck assembly with wiring harness and reset switch, light grey and white. Will fit the following models: Discovery, Advantage, Epic, N106M, Prolux uprights, and PN5, PN6 canister power nozzles. Available from Central Vacuum Direct.

Premium replacement common belt for Electrolux central vacuum power nozzles. Will fit the following Electrolux models: Epic, Discovery, Guardian, Legacy, 2100, 6500, 7000, N106, N106M, P/N4, and P/N5.Available from Central Vacuum Direct.

Electric wand (sold each) for Electrolux central vacuum power nozzles. Will fit the following models: Discovery, Advantage, Epic, N106M, Prolux uprights, and PN5, PN6 canister power nozzles. Available from Central Vacuum Direct.

Direct connect telescopic wand for Electrolux EXL1250 power nozzle.

Replacement motor Electrolux central vacuum power nozzles. This motor can be replaced in 15 minutes. Will fit the following models: Discovery, Advantage, Epic, N106M, Prolux uprights, and PN5, PN6 canister power nozzles. Available from Central Vacuum Direct.

Genuine Electrolux Alliance power nozzle neck. Will fit the following:
Beam - Precision 045309, Q200 045071, and Solaire 045072
Eureka - EL11A, EL4650, EL7066, EL7066A, EL7070, and EL7085
Available from Central Vacuum Direct.

Replacement Poly-V drive belt for the Beam Q100, Q200 and Electrolux Quiet Clean EL7, EL10, EL11, EL12, and EL13A central vacuum power nozzles. These belts are long lasting and are reinforced for maximum lifespan.  Available from Central Vacuum Direct.