Parts Finder | BEAM

Genuine Beam 2" metal exhaust extension.

Will fit the following models:
Beam - 697, 2500, 2900, and SC3500A
Ecopure - 401
Electrolux - PU3500

Genuine Beam 5.7" rubber motor gasket. This will fit many Beam, Electrolux, Frigidaire, and Honeywell central vacuum models. Click for a list of compatible models that this will work with. Available from Central Vacuum Direct.

Genuine Beam 8" Metal exhaust extension for two motor units.

Will fit the following Models:
Beam - 697, 2500, 2900, and SC3500
Ecopure - 401
Electrolux - PU3900

Base for Beam and Eureka power nozzles. Fits Beam Advocate and Imperial models, as well as Eureka E1403EZS models. This Product has been discontinued by the manufacturer. Please call us at (855)649-7996 to discuss your replacement options.

Genuine Beam 2 stage 120V motor assembly. Previous part umber was 119708. Will fit the following models:
Beam - 750
Eureka - CV1804 and CVS5000
Frigidaire - FCV460S
Available from Central Vacuum Direct.

This genuine Beam central vacuum printed circuit board fits will fit the following models:
Beam - 725, 750, 775, and 875
Eureka - CV1804A
Honeywell - 4B-H402A and 4B-H304A
Available from Central Vacuum Direct.

Genuine Electrolux 11" central vacuum filter. Will fit the following models:
Electrolux - PU503A
PowerStar - PS505
Available from Central Vacuum Direct.

Genuine Beam 2 hole central vacuum bags. These bags have two openings; one for the inlet, and one for the utility valve. If you have never used disposable bags before you will need an adapter to make these bags work. The adapter comes included with the 110073 kit, as well as 3 bags.

Genuine Beam 11" cleanstream filter. Recommended to be replaced every 5 years to maintain optimum performance.
Will fit the following models:

Beam - 2775, PU275A, SC275, SC375, SC380, SC3700
Electrolux - 4500, PU3450

Genuine Beam 11" white cleanstream central vacuum filter. Will fit the following models:
Beam - 225, 325, 725, 2725, SC200, SC225, and SC325.
PowerStar - PS405 and PS705
Available from Central Vacuum Direct.

Genuine Beam 14" cleanstream central vacuum filter. Recommended to be replaced every 5 years for optimum performance. Will fit the following models:
Beam - 287, 297, 298, 387, 395, 677, 2250, 2500, 2875, 2900, 3980C, SC398, SC3500, and SC3900
Frigidaire - 2825FRIG

Genuine Beam 11" blue cleanstream central vacuum filter.
Will fit the following central vacuum models:
Beam - 183, 186, 2089, BM185, BU180, and BU185
Electrolux - BM186A, PU3605B, and SC200E

Frigidaire - FCV185S, PU101A, and PU325A
Honeywell - 4B-H403B

Genuine 14" blue Beam cleanstream filter for central vacuums. Recommended to be replaced every 5 years. Will fit the following models:
Beam - 297, 397, 2220, and 2240
Electrolux - PU3900
Honeywell - 4B-H902
Powerstar - PS805 and PS905
Available from Central Vacuum Direct.

Genuine Beam 110371 central vacuum filter for the SC300A, 2067, and 2700 models. Available from Central Vacuum Direct.com

Genuine Beam 11" central vacuum cloth filter. Previous manufacturers part numbers have been 110347, 110379, 110830, 110386
Will fit the following central vacuum models models:
Beam - 153, 178, 189, 193, 197, 199, 275, 275A 750, 775, 2100, 2775, PU275, PU353, PU371, PU501, PU601, PU701, and SC375A

Honeywell - H503A and H703A

Genuine Beam 11" blue cleanstream central vacuum filter. Will fit the following models:
Beam - 225, 325, 725, 2725, SC200, SC225, and SC325.
PowerStar - PS405 and PS705

Genuine Beam 120V molded central vacuum power cord. Will fit the following models:
Beam - 225A, 275A, 295, SC325A, SC375A, and SC3900A
Electrolux - PU3650 and PU3900
Eureka - CV1801, CV1804, CV1810 and CV1820
Frigidaire - PU325A
Available from Central Vacuum Direct.

Genuine Beam 120V power switch.Will fit the following models:
Beam - 153, 167, 168, 177, 189, 197, 199, 225, 275, 371, 387, 395, 397, 677, 725, 750, 775, 875, 2089, 2100, 2150, 2220, 2240, 2250, 2725, 2775, and 2875
Honeywell - 4B-H802
Available from Central Vacuum Direct.

Package of 3 Genuine Beam 5 gallon central vacuum bags.  These bags are designed specifically for the Beam model 167 central vacuum.

Genuine Beam 240V central power switch. Will fit the following models:
Beam - 2500, 2900, and SC3500
Available from Central Vacuum Direct.

This is the replacement Beam 3"x5" Central Vacuum Exhaust Filter.  The exhaust filter is located inside the machine and should be replaced about once a year.

Genuine Beam 4 gallon dust bin.

Will fit the following models:
Beam - 189, 199, 725, 750, 775, 2089, 2100, SC225, SC275
Ecopure - 201
Electrolux - 3650B

Replacing a Beam 677S Circuit Board is relatively easy and does not take that much technological know how. Accessing the PC board and motor area only requires removing a few screws on most central vacuum systems. This PCB was discontinued by the manufacturer 10/12/2012. Call us at (855)649-7996 to discuss replacement options.

Genuine Beam central vacuum 7 gallon dust bin.

Will fit the following Beam central vacuum models:
Beam - 297, 298, 875, 2250, 2500, 2500, 2875, and 2900

Genuine Beam 7.2" rubber central vacuum motor gasket.
Will fit the following models:
Beam - 253, 875, 2875
Frigidaire - FGCV550SQ and FGCV550Q

Replacement Beam Advocate and Solaire Belt. Will work on select Electrolux, Eureka, and Honeywell power nozzles as well.This genuine Beam Advocate belt is geared and reinforced.

Replacement Beam Advocate and Solaire Motor power nozzle. Motor has a geared axle for a cogged belt and is very easy to change out. Homeowners with very basic do-it-yourself skills can easily repair this power head. Old manufacturers part number was 155209. Available from Central Vacuum Direct.

Genuine replacement Beam Advocate Brushroll.  This brushroll has high quality bristles that deeply agitate carpet for a cleaner home.

Replacement Beam and Electrolux telescopic wand for the Beam Advocate. Imperial, Electrolux EXL1250, and EXL1350  power nozzles. This wand is steel and comes with attached cord. EZ change release makes it possible to switch quickly from the power head to any other attachment.

This is a genuine replacement Beam Imperial Neck Assembly for the Beam Advocate, Imperial, and Solaire power heads.  Assembly does not include any wiring.  This is the plastic neck assembly only.

Replacement Foot Pedal Release for Beam Aero III, Butler, and Classic model power nozzles. Will also work with M&S MS1199, Nutone 399, and other power heads.

Replacement wheel for central vacuum power nozzles. Replacement wheel will easily snap into place on the old power nozzle.

Will fit the following models:

• BEAM Aero III, Butler, RugMaster

Genuine Beam Alliance 600 series motor assembly.
Will fit the following Beam Alliance models: 600SA, 650SB, and 650TB.

Genuine Beam Alliance 700 series motor assembly.
Will fit the 700TB and 700TC model Beam alliance power units.

Genuine 4 gallon Beam dirt bucket for the Alliance series power units.

Will fit the following Beam Alliance models: 600SA, 650SB, 650TB, 700TB, 700TC

Genuine Beam Alliance Motor seal gasket.

Will fit the following Beam Alliance models: 600SA, 650SB, 650TB, 700TB, and 700TC

Genuine Beam printed circuit board (PCB) for the Alliance series central vacuum power units. Will fit the following Beam Alliance models: 600SA, 650SB, 650TB 700TB, and 700TC.

Replacement circuit board #100562 for Beam central vacuum systems. This PC board kit comes with all the necessary wiring and plugs to change your existing central vacuum PC board. will fit the following models:
Beam - 2150
Eureka - CV1001F, CV1001G, and CV1004
Honeywell - 4B-702 and 4B-H802

Genuine Beam anti vibration upgrade kit for power units. Designed to be used with the mounting bracket to reduce the vibration of your central vacuum main unit.

Will fit all Beam, Electrolux, Frigidaire, and Honeywell central vacuums.

Genuine Beam Atlis intake seal and bag upgrade kit. This kit will tighten the intake seal on your power unit and allow you to use a disposable bag making it less messy when you empty the dust bucket. Click to find out which models this is compatible with. Available from Central Vacuum Direct.

76" black power cord assembly, 240V for Beam 3067, 677, 3500, and Ecopure 401 central vacuum systems.

BEAM Circuit Board #06-0001-01 for the BEAM 254 & 284 central vacuum systems. A central vacuum PC board is relatively easy to install, and can be done usually within an hour's time.

Changed to new #60858-1 or #155528.  Fits all Beam Butler Power Nozzles. Models BM1195 and BM1197.

Keep your Beam central vacuum running at peak performance with the Beam Central Vacuum 6 Gallon Bags. These bags are designed to work with your Beam central vacuum system flawlessly, helping you keep a cleaner, healthier home for your family. There are 3 bags per package.

Upgrading to disposable central vacuum bags is a great way to increase the filtration of your Beam central vacuum unit. Getting rid of the dirt will no longer be a messy operation. The kit includes 3 bags and the required adapter, everything you'll need to convert to disposable bags.

Genuine Beam new style utility valve replacement kit.
Will fit the following models:
Beam - 225A, 275A, 295, 395, SC325, SC375, SC398, SC3500, and SC3900
Frigidaire - PU325

Replacement Beam Central Vacuum Serenity front Wheel and Axle set. Just one of Beam's many high quality replacement parts. Complete set.

Genuine BEAM central vacuum printed circuit board.

Will fit the following models:

• BEAM - 275A, 295, 395, SC275A, SC375A, SC398, SC3900A
• Electrolux - PU3450, PU3600, PU3900, SC200E, SC3700
• Frigidaire - PU325A, SC325
• Honeywell - 4B-H403, 4B-H603, 4B-H703, 4B-H803
• PowerStar - PS405, PS505, PS705, PS805

Common Beam 120V PCB for single motor units. This circuit board will fit many popular central vacuum models. Click to see model numbers that this is compatible with. Available from Central Vacuum Direct.

Genuine Beam printed circuit board (PCB) #100630. Will fit the following models:
Beam 225A and SC325A
Frigidaire BM166, CVS4100, and CVS6100
Honeywell 4B-H503
Electrolux BM166A and PU503A

Replacement circuit board #101111. Replacing a PC board in your central vacuum is relatively easy and can be done by most people who are moderately handy. Replacing a PC board usually takes about 30-45 minutes and requires minimal tools.

Replacement circuit board #101112. Replacing a PC board in your central vacuum is relatively easy and can be done by most people who are moderately handy. Replacing a PC board usually takes about 30-45 minutes and requires minimal tools.

Genuine Beam Control Module for large diameter units with LCD screens. Will fit the following Beam models:
395, SC395, SC398, and SC3900.

Genuine BEAM control module/SUI board.

Will fit the following models:

• BEAM 375C, PU201A, PU503A, SC200A, SC200B, SC225A, SC2225C, SC225C, SC275A, SC275C, SC295A, SC295C, SC300A, SC325A, SC325C, SC375A, SC375C, SC395A, SC395C
• Ecopure 201, 375
• Electrolux 3450A, PU3450A
• Eurerka CV5500, CVMini
• Imperium BM186A

Manufacturer Part Number: 100601

Replacement Beam EZ Change Lower Wand New Style 2 Prong for the new style Beam Rugmaster power head. This wand has the same EZ-change assembly, but has 2 prongs instead of 3.

This replacement Beam EZ Change Neck Assembly was common on some Beam Rugmaster, Imperial, Solaire and Advocate power heads, but was also installed on other versions of various brands including the Eureka CV205. If you are unsure if this is the part you need, feel free to contact us.

Genuine Beam central vacuum  EZ Change quick release power nozzle cord for the Beam EZ Change quick release system.  The pronged end rests in the EZ Change neck coupler,  while the wires are connected internally in the power nozzle.  Available from Central Vacuum Direct.

Replacement belt for the Beam Imperial power nozzle. This genuine Beam Imperial belt is geared and reinforced. Beware of cheap generic imitation belts, they will not last.

Genuine Beam motor gasket for large motor units. Will fit the following models:
Beam - 295, 395875, 2875, 2900, SC295, SC395, and SC3500
Electrolux - PU3900
Available from Central Vacuum Direct.

Genuine Beam Filter 110368 for Model 167

Genuine Beam 5.7" foam motor gasket.
Will fit the following models:
AstroVac - SR-42
Beam - 35, 36, 145, 160, 165, 168, 173, 294, 297, 660, and 677
Eureka - CV1801M and CV1801L
Electrolux - PU353, PU361, and PU371

Replacement Beam new style motor for Aero II, Butler, Classic, and Rugmaster Plus central vacuum power nozzles. This motor will work with all newer style Beam Rugmaster Plus & Eureka Power Heads. Available now at Central Vacuum Direct.

Genuine Beam 240V printed circuit board (PCB) for 2 motor central vacuum units. Will fit the following models:
Beam 697, 2500, 2900, and SC3500
Honeywell - 4B-H902
PowerStar - PS905

Genuine Beam printed circuit board (PCB) for 120V Intelliwatch Power units. Designed for use specifically in the following Beam models: 199G, 199H, CV199 Millennium Edition, 2250C, and 2250D. Works as a great substitute for the discontinued Hayden HA-8766-0090 PCB for SuperVac 3600, 6000, and 9000 models. Available from Central Vacuum Direct.

Genuine Beam central vacuum utility valve replacement kit. Will fit the following models:
Beam - 189, 193, 197, 199, 287, 297, 387, 387A, 677, 697,725, 750, 775, 875, 2100, 2150, 2200, 2250, 2500, 2725, 2775, 2875, and 2900

Genuine Beam 120V power cord for central vacuum main units. Will fit the following Beam models: 153, 167, 168, 177, 189, 193, 197, 199, 204, 287, 297, 298, 371, 387, 725, 750, 775, 875, 2100, 2150, 2220, 2240, 2250, 2725, 2775, and 2875. Available from Central Vacuum Direct.

Genuine main printed circuit board. Will fit the following central vacuum power nozzle models:
Beam: Q100 and Q200
Electrolux: EL7, EL10, EL11A, EL12, EL13A EL7061, EL6988E, EL7057, and ELUX1600

Secondary PCB for Beam Q100, and Electrolux EL7061, EL6988E, and EL7057 central vacuum power nozzle models.

Genuine replacement Beam Q Brushroll with Bottom Plate for the Beam Q powernozzle.  This Beam Q brushroll has high quality bristles that agitate the carpet to clean deeply.  Kit comes with brushroll, replacement belt, and bottom plate.

These Beam Q Foot Pedals are for the Beam Q power head.  Kit comes with both foot pedals and necessary springs.

Replacement Beam Q Height Adjustment.  This central vacuum part installs into the new Beam Q style power nozzle and adjusts the height of the brush.  This is a replacement part only.

Genuine Beam Q central vacuum power nozzle motor. Will fit the following central vacuum power nozzle models:
Beam: Q100 and Q200
Electrolux: EL7, EL10, EL11A, EL12, EL13A EL7061, EL6988E, EL7057, and ELUX1600
Available from Central Vacuum Direct.

This is the genuine neck assembly for the new style Beam Q100 and Electrolux Quiet Clean central vacuum power heads with the "sumo" fitting. It is oval at the top, as opposed to the old round style power heads. Designed for use in the Beam Q100 (045056) and Electrolux Quiet Clean (045059) power nozzles.

Genuine Beam Q sumo fitting telescopic central vacuum wand. Will fit the following central vacuum power nozzle models:
Beam - Q100 (045056,) SL100 (045055)
Electrolux - EL7, EL10, EL12, EL13A, ELUX1600 EXL103A,EXL1250, EXL1350, and Quiet Clean (045059) power nozzles
Eureka - E1403EZS, ECP700E, ECP750E, and EL101A
Honeywell - HL102A

Genuine Beam central vacuum relay assembly. Will fit the following models:
Beam - 193, 287, and 297
Available from Central Vacuum Direct.

Genuine Beam Rugmaster central vacuum 3 prong power nozzle cord. Available at Central Vacuum Direct. This cord has been on an extended back-order from the manufacturer and will be substituted with a 2 prong cord with the same fitting on the plug end.

Replacement Beam Rugmaster base housing for the Beam Rugmaster central vacuum power head at Central Vacuum Direct.  Base Housing for Rugmaster Brush with switch and white cover 045320.  Before Jan. 2000 after 2000 use 155472 with a gray cover.

Genuine Beam Rugmaster Belt will fit many Beam and Eureka power heads. Replacing the belt helps increase the drive ability of your brush roll which, in turn, keeps your floors and home cleaner. The manufacturer recommends replacing the belt every 6 months to ensure optimum performance. Available at Central Vacuum direct.

Replacement Beam Rugmaster Bottom Plate.  Don't throw away the old power nozzle when you can repair it!  Save money and use replacement parts.  This plate will only fit on the Beam Rugmaster series after the year 2000 and has a gray cover. For pre 2000 use 155407 with a white cover.

Replacement Beam Rugmaster Brush Cover for the Beam Rugmaster central vacuum power head at Central Vacuum Direct.  This cover for the Beam Rugmaster is located within the power head itself.  It covers the brush roll and is easily installed.

This high quality, steel Beam Rugmaster Brush Roll is designed to be used with the Beam Rugmaster and Eureka power heads.  The replaceable brushes make it easy and cost effective to keep cleaning your home efficiently!

Fits all Beam Rugmaster Models, Eureka CV205, and Honeywell model 045320. Replace every 3-5 years to maintain optimum cleaning effiency.

Genuine Beam Rugmaster new style 2 prong cord for your Beam Rugmaster Plus central vacuum power nozzle. Cord installs into the Beam power head then connects to the extension wand.

Replacement Beam Rugmaster Old Style 2 Prong Cord.  This cord has a different shape on the prong side end as the new style 2 prong cord.  Make sure you note the difference before purchasing.

Genuine Beam Rugmaster central vacuum power nozzle motor for the Beam Rugmaster and Rugmaster Plus central vacuum power nozzles. This motor will work with all older style Beam Rugmaster & Eureka power heads.

This motor replaces:
Eureka CV205 (older models) and Beam Rugmaster Plus (older models).

Genuine Beam top cover for Rugmaster Plus central vacuum power nozzles. This hood will work for all Beam Rugmaster Plus central vacuum power heads.

The Beam Rug Master Plus Power Head will stand up to even the most demanding jobs. This design has been proven throughout the years to be one of the most dependable and economic choices. This 1-1/4" universal fit power nozzle is perfect for dense plush carpeting. Available from Central Vacuum Direct.

Don't let your worn down brush strips cause a problem with your power head. These genuine Beam Rugmaster Replacement Brush Strips will fit all Beam Rugmaster or Eureka CV205 models.  They are easily installed and will bring new life to your central vacuum system!  Get yours now at Central Vacuum Direct!

Replacement  Beam Rugmaster Upper Wand for the Beam Rugmaster Power Team series. Don't let your power team go to waste, simply repair the broken parts and be on your way! Available from Central Vacuum Direct.

The Beam Rugmaster 155451 Wand Old Style  is a solid metal extension wand The 155451 Beam upper wand is the replacement for the Beam Rugmaster wand at Central Vacuum Direct.

The Beam Rugmaster Wand Old Style 3 Prong is a solid metal extension wand with integrated wiring for an electric power head. The wiring is for power heads with 3 prongs and is the replacement for the Beam Rugmaster wands at Central Vacuum Direct.

Replacement Beam Rugmaster central vacuum power head wheel. Service note: When using this wheel for a Beam Advocate power nozzle you will have to remove 1/4" from the post that holds the wheel in place on the nozzle base to get it to lock in place; the original wheels have been discontinued. Why replace the whole power head when you can just replace the broken part?

Genuine package of Beam Mobil Maid and On-Board central vacuum bags. Package contains three bags and one filter. These durable cloth bags may be used in place of lesser quality paper bags for other companies' boat and RV central vacuum cleaners. Will fit the following models:
Beam - 35, Mobil Maid, and On-Board units
Canavac - 211C, 211CRV, and C-750
Titan - TCS-4702
Available from Central Vacuum Direct.

Genuine Beam Serenity central vacuum replacement cord for the Serenity EBK340 power nozzle.  This cord attaches at the base of the Serenity power nozzle, then is stretched up to the handle of the hose where it is plugged in.

This is the replacement Beam Serenity Brushroll for the Beam Serenity power head. Maintaining your power head is important for making your Beam central vacuum last. Replacing the brush roll will increase the cleaning effectiveness and efficiency.

Genuine Beam Serenity central vacuum power nozzle belt. Will work on the following power nozzles: Beam Serenity, Canavac Performance, Eureka Zuum, Vacuflo Edge, Wessel Werks EBK340, and EBK360. Available from Central Vacuum Direct.

Genuine Beam Serenity direct connect electric power nozzle. Will fit all Beam Serenity power nozzles where the the electric cord is fully integrated to the wand.

Beam Serenity Power Nozzle Micro on/off switch.

Replacement motor for the Beam Serenity EBK340 central vacuum power nozzle. This motor has a geared axle for a cogged belt and is very easy to change out. Homeowners with very basic do-it-yourself skills can easily repair this central vacuum power head motor. Available from Central Vacuum Direct.

Neck Assembly for Beam Serenity and Wessel Werks EBK340 Power Nozzles.

The Serenity Plus Power Head by Beam is quiet, well designed, and keeps your house clean with its swivel neck that provides smooth responsive control. Ideal for plush and dense carpeting. Get yours today from Central Vacuum Direct.

This is the genuine Beam Serenity Power Nozzle Circuit Board.  It will work with all the Beam Serenity power nozzles that were available from 2000-present.

This neck is the genuine Beam Serenity Power Nozzle Neck.  The neck includes internal wiring that gets connected to the power nozzle. Will fit the Beam Serenity power nozzle and any model EBK340 Wessel Werks power nozzle.

Replacement PC Board for Beam Solaire SL100 A,B,C 045055.  This PC board  can be replaced easily.

Replacement Beam Solaire Cogged Belt 2 pack for the Beam Solaire power head at Central Vacuum Direct.  Cogged belts last a lot longer than normal rubber belts and can last up to two years without needing replacement.

Easily replace the Beam Solaire Bottom Plate. This is a genuine Beam replacement part made for the Beam Solaire. This part will clip in where broken bottom plate is. ***Service Tip: If you hover you cursor over the picture and your old bottom plate has five tabs (Imperial and Advocates) you will need to shave off the center tabs of the replacement plate, and then half off of the outer half of the tabs next to the center most tabs for the new plate to fit. The five tab plate has been discontinued.***

Genuine replacement brushroll for the Beam Solaire central vacuum power nozzle. This brushroll has high quality bristles that deeply agitate carpet for a cleaner home.

Replacement Beam Solaire LED PC Board with wire for the Beam Solaire central vacuum power nozzle. This particular PC board is located within the housing and can be replaced by a do-it-your-selfer.

Genuine Beam Solaire power head neck for the new style Beam Solaire central vacuum power head. It is oval at the top and uses the "Sumo" attachment fitting, as opposed to the old round universal size Beam Solaire.

Rear Wheels for the Beam Solaire and Advocate central vacuum power nozzles. Will also work on Electrolux EXL103A, EXL1250,  EXL1350, Eureka E1403EZS, ECP700E, ECP750E, and Honeywell HL102A models as well.These are genuine Beam central vacuum parts.

The Beam 045062 Solaire Power Head works well for dense carpeting thanks to its automatic height adjustment. Great looking and ultra quiet this powerhead has the features you'll love. Will fit any attachments kits that use the universal fit 1-1/4" fitting. Available from Central Vacuum Direct.

The Beam SL100 Solaire Power Head works well for dense carpeting. Great looking and ultra quiet this powerhead has the features you'll love. Will fit Beam attachments kits that use the Sumo "D" shaped fitting. Available from Central Vacuum Direct.

The BEAM Sumo to round attachment adapter is designed to change Sumo wands or attchments to the round neck design.
Fits Sumo D-shape; for air attachments only.

Beam Swivel Neck 155459 for Rugmaster Plus, Classic 1, and Eureka CV205 central vacuum power nozzles.  Exact replacement part for your Rugmaster plus central vacuum power head.  Made from durable plastic.

Genuine Beam central vacuum thermal motor seal.
Will fit the following models:
Beam - 167, 168, 189, 199, 725, 750, 775, 2089, 2100, 2725, 2775, SC325A, and SC375A
Ecopure - 401, 375, and 201
Electrolux - 3450A and 3900B

This Beam Universal Telescopic Wand with button lock is compatible with 99% of central vacuum systems. The friction fit at the bottom allows you to use a variety of attachments such as a hardwood floor brush, dusting brush, and more!

Reach your vaulted ceilings easily with this lightweight plastic wand. This 19" wand will fit all 1-1/4" hoses and attachments.

Replacement HEPA filter cartridge for central vacuum systems. To be used with the HFC9 HEPA filtration system. Replace every year for optimum filtration.

This product is No Longer Available. Please call us at (855)649-7996 to discuss your replacement options.

15 Watt headlight for Beam Rugmaster Plus 045389 central vacuum power nozzle and many more. Available from Central Vacuum Direct.

Genuine Beam curved exhaust elbow.

Will fit the following models:
Beam - 395, SC325A, SC398A, SC3500C, and SC3900A
Ecopure - 401 and 375
Electrolux - PU3450A, PU3650B and PU3900B
Frigidaire - PU325A

Package of 3 genuine Eureka CV Series central vacuum bags for Eureka central vacuum systems. These bags remove 97.8 percent of dust and allergens, helping to keep your home clean and healthy. Will fit the following Eureka central vacuum models: CV3120F, CV3121H, CV3291L, CVS5000, CV5500, CVS6000, CV6500i, CVS7000

Genuine Beam 3-1/2" aluminum exhaust extension.

Will fit the following models:
Beam - 160, 189, 199, 725, 750, 775, 2089, and 2100

Genuine Beam plastic exhaust extension with reducer.

Will fit the following models:
Beam - 375C, SC225, and SC275
Ecopure - 375 and 201
Electrolux - PU3450A and PU3650B
Frigidaire - PU325A
Honeywell - H503A

Felt wheel washer for Beam Rugmaster Plus 045389, Rugmaster with switch 045320, and Butler power head 045330.

Reach your vaulted ceilings easily with this lightweight plastic central vacuum wand. This 19" wand will fit all 1-1/4" universal fit central vacuum hoses and attachments.

The HFC9 exhaust HEPA Filtration system has a charcoal membrane and strong body that is fully sealed and filters the exhaust air coming out of your central vacuum down to 99.97 microns. Easy to use, this HEPA filter installs in minutes and only needs to be replaced once a year depending on frequency of use. Replacement filter here.

Genuine Beam central vacuum Intake gasket. Will fit the following models:
Beam - 294, 297, 397,660, 677, 2500, and 2900
Available from Central Vacuum Direct.

Genuine Lamb 120V 2 stage all metal motor. Part numbers used have been: 115334, 140230, and 3511-01. Click to see a full listing of central vacuum makes and models that this popular motor fits into. In stock and ready to ship.

Genuine Lamb 3 stage 120V metal bypass central vacuum motor. Previous manufacturers part numbers have been 116103, 116119, 116264, and 140240.
Will fit the following models:
Beam - 204
Brute - XB12119

Genuine Lamb 2 stage 240V central vacuum motor. This motor is specifically designed for use in the Beam model 677 central vacuum power unit.

Genuine Lamb 120V 2 stage bypass motor. This motor has been used in many central vacuum throughout the years. Click for more information like model number compatibility and technical informtion. Available from Central Vacuum Direct.

Genuine Lamb 120V 2 stage thru-flow central vacuum motor. Will fit the following models:
Beam - 168
Vacuflo - Maxum Whisper

Genuine 3 stage 120 volt Lamb central vacuum motor. This powerful motor will fit in a wide variety of popular models. Click for more information like models that this is compatible with and technical data. Available from Central Vacuum Direct.

Genuine Lamb 3 stage 240V central vacuum motor. Previous part number was 140304. Click for a comprehensive listing of makes and models that this motor wil work in. Available from Central Vacuum Direct.

Genuine Lamb 2 stage 120V bypass central vacuum motor. Will fit the following models:
Beam - 193
Brute - 99175
PowerStar - 99175
Available from Central Vacuum Direct.

Genuine Lamb 120V 2 stage motor. Will fit the following models:
AstroVac - SR-22, SR50, and SR-72
Beam - 287
Eureka - CV900, and CV1200

Genuine Lamb 120V 3 stage metal central vacuum motor. Alternative part number is 140243. Click to see a list of model numbers that this motor has been used in to find out if it's compatible with your central vacuum. Available from Central Vacuum Direct.

Genuine Lamb 120V bypass central vacuum motor. Previous part numbers have been: 117470, 140242, 140243, and 7694-01. Designed to fit the following central vacuum models:
Beam - 297, 2240
Brute - 99025, 99026, and 99150
Nutone - 353, CV353, CV553, and CV653
Powerstar - 99025, 99026, 99150
Vacuflo - 360, 860

Genuine Lamb two stage bypass motor. This common motor will fit many central vacuum models, click to see a full listing. Available from Central Vacuum Direct.

Genuine Lamb 240V 2 stage bypass central vacuum motor. Old part number was 140413. Will fit the following models:
Beam - 2900 and SC3500C
Dirt Devil - 1099e, 1490, CV3200, and CV3400
Royal- CS1200
Vacuflo - FC1550

Genuine Lamb 120V 2 stage central vacuum motor assembly.

Intended for use in the following models:
Beam - 298, 3980C, and SC398A
PowerStar - PS805

Genuine Lamb single stage 120V central vacuum motor.

Will fit the following models:
Beam - 35, 725, BU160, BU160A
Eureka - CV1004A, CV1004B, CVS4000

Genuine Lamb 2 stage 120V bypass central vacuum motor. Previous part numbers have been 119992 and 140373. Click to see which makes and models that this popular central vacuum motor fits into. Available at Central Vacuum Direct.

Genuine Lamb 2 stage 120V large meta central vacuum motor. Previous part number was 122031.

Will fit the following models:
Beam - 295, 395, and SC3900A
Electrolux - PU3900
Honeywell - 4B-H803

Get the extension you need to clean in those dark, dirty corners and ceiling fans beyond reach. This central vacuum extension wand is standard fit and will work with almost any vacuum or central vacuum.  Available from Central Vacuum Direct.

Consider it a deadbolt against dust. With its anti-allergenic micro-filtration that removes fine dust down to 1 micron, this two-layer filter provides you with a breath of fresh air. Easy to install, no glue or tools required.

Genuine Beam 7.2" central vacuum motor gasket.
Will fit the following models:
Beam - 298, 395, 875, 2250, 2875, SC398A and SC3900A
Electrolux - PU3900

Package of 3 genuine Beam motor hold down springs.

Will fit the following models:
Beam - 160, 167, 183, 189, 3500A, 3500C, SC3500C
Ecopure - 401

Red 3 pack of Motor hold down springs for Beam 199, 2087, 2500, 2750, and 3500 models. Please note that for 2 motor units you will need to purchase two packages of these springs.