Shop By Brand | Honeywell | Powerhead Parts

Replacement Beam Advocate and Solaire Belt. Will work on select Electrolux, Eureka, and Honeywell power nozzles as well.This genuine Beam Advocate belt is geared and reinforced.

Replacement Beam Advocate and Solaire Motor power nozzle. Motor has a geared axle for a cogged belt and is very easy to change out. Homeowners with very basic do-it-yourself skills can easily repair this power head. Old manufacturers part number was 155209. Available from Central Vacuum Direct.

Genuine replacement Beam Advocate Brushroll.  This brushroll has high quality bristles that deeply agitate carpet for a cleaner home.

Replacement Beam and Electrolux telescopic wand for the Beam Advocate. Imperial, Electrolux EXL1250, and EXL1350  power nozzles. This wand is steel and comes with attached cord. EZ change release makes it possible to switch quickly from the power head to any other attachment.

This is a genuine replacement Beam Imperial Neck Assembly for the Beam Advocate, Imperial, and Solaire power heads.  Assembly does not include any wiring.  This is the plastic neck assembly only.

Replacement Foot Pedal Release for Beam Aero III, Butler, and Classic model power nozzles. Will also work with M&S MS1199, Nutone 399, and other power heads.

Genuine Beam central vacuum  EZ Change quick release power nozzle cord for the Beam EZ Change quick release system.  The pronged end rests in the EZ Change neck coupler,  while the wires are connected internally in the power nozzle.  Available from Central Vacuum Direct.

This is the genuine neck assembly for the new style Beam Q100 and Electrolux Quiet Clean central vacuum power heads with the "sumo" fitting. It is oval at the top, as opposed to the old round style power heads. Designed for use in the Beam Q100 (045056) and Electrolux Quiet Clean (045059) power nozzles.

Genuine Beam Q sumo fitting telescopic central vacuum wand. Will fit the following central vacuum power nozzle models:
Beam - Q100 (045056,) SL100 (045055)
Electrolux - EL7, EL10, EL12, EL13A, ELUX1600 EXL103A,EXL1250, EXL1350, and Quiet Clean (045059) power nozzles
Eureka - E1403EZS, ECP700E, ECP750E, and EL101A
Honeywell - HL102A

Genuine Beam Rugmaster new style 2 prong cord for your Beam Rugmaster Plus central vacuum power nozzle. Cord installs into the Beam power head then connects to the extension wand.

Replacement  Beam Rugmaster Upper Wand for the Beam Rugmaster Power Team series. Don't let your power team go to waste, simply repair the broken parts and be on your way! Available from Central Vacuum Direct.

Replacement Beam Rugmaster central vacuum power head wheel. Service note: When using this wheel for a Beam Advocate power nozzle you will have to remove 1/4" from the post that holds the wheel in place on the nozzle base to get it to lock in place; the original wheels have been discontinued. Why replace the whole power head when you can just replace the broken part?

Easily replace the Beam Solaire Bottom Plate. This is a genuine Beam replacement part made for the Beam Solaire. This part will clip in where broken bottom plate is. ***Service Tip: If you hover you cursor over the picture and your old bottom plate has five tabs (Imperial and Advocates) you will need to shave off the center tabs of the replacement plate, and then half off of the outer half of the tabs next to the center most tabs for the new plate to fit. The five tab plate has been discontinued.***

Genuine Beam Solaire power head neck for the new style Beam Solaire central vacuum power head. It is oval at the top and uses the "Sumo" attachment fitting, as opposed to the old round universal size Beam Solaire.

This Beam Universal Telescopic Wand with button lock is compatible with 99% of central vacuum systems. The friction fit at the bottom allows you to use a variety of attachments such as a hardwood floor brush, dusting brush, and more!

15 Watt headlight for Beam Rugmaster Plus 045389 central vacuum power nozzle and many more. Available from Central Vacuum Direct.

Wessel-Werk hood w/lens for all EBK340 central vacuum power nozzles.

Will work for all EBK340 central vacuum power heads: Beam Serenity, Chateau, Honeywell H400, and others manufactured by Wessel-Werk with the EBK340 model number.