BUILD YOUR OWN CENTRAL VACUUM SYSTEM
Design a Custom BEAM Central Vacuum System
Create a central vacuum system tailored to
your home with BEAM power units, installation
components and cleaning accessories.
Start by selecting a power unit based on
your home's square footage, then choose
the additional equipment needed to
complete your installation.
As a conservative shopping guideline,
consider selecting a power unit with a
manufacturer-recommended coverage area
of approximately twice your home's
square footage. This allows additional
capacity for basements, longer piping
runs and potential future expansion.
Final sizing should also account for
your system's layout and specifications.
YOUR CUSTOM SYSTEM STARTS HERE
Build Your BEAM System in 6 Steps
Follow these steps to select your power unit,
plan your installation and choose the
accessories that fit your home.
-
01
Select Your BEAM Power Unit
Start by choosing a BEAM central vacuum
power unit based on your home's square
footage and cleaning requirements.
Compare manufacturer coverage ratings,
performance and filtration options.
BROWSE POWER UNITS »
-
02
Add Your Inlet Valve Kits
Plan approximately one inlet valve
for every 675 square feet as an
initial guideline. Actual inlet
placement should be based on hose
reach, floor plan and accessibility.
Choose valve kits with or without
central vacuum pipe.
SHOP INLET VALVE KITS »
-
03
Consider a VacPan Kit
Make everyday kitchen cleanup easier
by adding a VacPan automatic dustpan
inlet. Simply sweep compatible dry
debris toward the inlet for
convenient collection.
SHOP VACPAN KITS »
-
04
Plan Your Outside Venting
If your selected BEAM system will
be exhausted outdoors, consider
an outside venting kit to help
complete the installation.
Review the power unit's venting
requirements before ordering.
VIEW OUTSIDE VENTING KIT »
-
05
Choose Your Hose & Attachment Set
Select a cleaning attachment set
based on your flooring types,
preferred hose length and cleaning
needs. Consider adding a hose sock
to help protect walls, furniture
and other surfaces.
SHOP ATTACHMENT SETS »
-
06
Add a Garage Cleaning Kit
Extend the convenience of your
central vacuum system to your
garage. A garage cleaning kit
can help you clean vehicle
interiors, garage floors and
other suitable areas.
SHOP GARAGE CLEANING KITS »
NEED HELP DESIGNING YOUR BEAM SYSTEM?
Our central vacuum experts can help you
choose the right power unit, estimate
inlet valve requirements and select
compatible installation accessories.
CALL 1 (855) 649-7996
|
|
COMPLETE YOUR CUSTOM BEAM SYSTEM
Before You Finalize Your Central Vacuum System
Designing a complete central vacuum system
involves more than selecting a power unit.
Review your home's layout, installation
requirements and cleaning accessories
to make sure you've chosen the components
needed for your project.
01
Double-Check Your Inlet Locations
Make sure your planned inlet valves
provide convenient hose coverage
throughout the home. Consider
hallways, bedrooms, living areas,
finished basements and other
spaces you'll want to clean.
02
Review Your Installation Materials
Confirm that you have the tubing,
fittings, mounting accessories
and other components needed for
your system. Installation requirements
vary depending on the home's layout
and selected equipment.
03
Choose the Right Cleaning Accessories
Consider your flooring surfaces,
preferred hose length and cleaning
tasks when selecting attachments.
Accessories such as VacPans,
hose socks and garage kits
can add convenience.
INSTALLATION ESSENTIALS
Need Additional Installation Parts?
Browse our selection of central vacuum
tubing, fittings, inlet valves and
installation accessories to help
complete your custom BEAM system.
SHOP INSTALLATION PARTS
EXPERT CENTRAL VACUUM ASSISTANCE
Need Help Building Your Custom BEAM System?
With over 40 years of central vacuum experience,
our team can help you review power unit
sizing, inlet valve placement and
installation components before
you place your order.
CALL 1 (855) 649-7996
|
|
|
