Shop By Brand | Eureka | Powerhead Parts

Genuine Beam 2G metal telescopic wand. Will fit the following power nozzle models:
Beam - Precision 045309, Solaire 045072, and Q200 045071
Eureka - EL11A, EL4650, EL7066, EL7066A, EL7070, and EL7085
Beam part number is 155278. Eureka part number is 2193841.

Replacement Beam Advocate and Solaire Belt. Will work on select Electrolux, Eureka, and Honeywell power nozzles as well.This genuine Beam Advocate belt is geared and reinforced.

Replacement Beam Advocate and Solaire Motor power nozzle. Motor has a geared axle for a cogged belt and is very easy to change out. Homeowners with very basic do-it-yourself skills can easily repair this power head. Old manufacturers part number was 155209.

Genuine replacement Beam Advocate Brushroll.  This brushroll has high quality bristles that deeply agitate carpet for a cleaner home.

Replacement Foot Pedal Release for Beam Aero III, Butler, and Classic model power nozzles. Will also work with M&S MS1199, Nutone 399, and other power heads.

Changed to new #60858-1 or #155528.  Fits all Beam Butler Power Nozzles. Models BM1195 and BM1197.

This replacement Beam EZ Change Neck Assembly was common on some Beam Rugmaster, Imperial, Solaire and Advocate power heads, but was also installed on other versions of various brands including the Eureka CV205. If you are unsure if this is the part you need, feel free to contact us.

Genuine Beam central vacuum EZ Change quick release power nozzle cord for the Beam EZ Change quick release system. The pronged end rests in the EZ Change neck coupler, while the wires are connected internally in the power nozzle.

Replacement Beam new style motor for Aero II, Butler, Classic, and Rugmaster Plus central vacuum power nozzles. This motor will work with all newer style Beam Rugmaster Plus & Eureka Power Heads.

Genuine Beam Q sumo fitting telescopic central vacuum wand.

Will fit the following central vacuum power nozzle models:
Beam - Q100 (045056,) SL100 (045055)
Electrolux - EL7, EL10, EL12, EL13A, ELUX1600 EXL103A,EXL1250, EXL1350, and Quiet Clean (045059) power nozzles
Eureka - E1403EZS, ECP700E, ECP750E, and EL101A
Honeywell - HL102A

Genuine Beam Rugmaster central vacuum 3 prong power nozzle cord. Available at Central Vacuum Direct. This cord has been on an extended back-order from the manufacturer and will be substituted with a 2 prong cord with the same fitting on the plug end.

Genuine Beam Rugmaster Belt will fit many Beam and Eureka power heads. Replacing the belt helps increase the drive ability of your brush roll which, in turn, keeps your floors and home cleaner. The manufacturer recommends replacing the belt every 6 months to ensure optimum performance.

Replacement Beam Rugmaster Bottom Plate.  Don't throw away the old power nozzle when you can repair it!  Save money and use replacement parts.  This plate will only fit on the Beam Rugmaster series after the year 2000 and has a gray cover. For pre 2000 use 155407 with a white cover.

Replacement Beam Rugmaster Brush Cover for the Beam Rugmaster central vacuum power head at Central Vacuum Direct.  This cover for the Beam Rugmaster is located within the power head itself.  It covers the brush roll and is easily installed.

This high quality, steel Beam Rugmaster Brush Roll is designed to be used with the Beam Rugmaster and Eureka power heads.  The replaceable brushes make it easy and cost effective to keep cleaning your home efficiently!

Fits all Beam Rugmaster Models, Eureka CV205, and Honeywell model 045320. Replace every 3-5 years to maintain optimum cleaning effiency.

Replacement Beam Rugmaster Old Style 2 Prong Cord.  This cord has a different shape on the prong side end as the new style 2 prong cord.  Make sure you note the difference before purchasing.

Genuine Beam Rugmaster central vacuum power nozzle motor for the Beam Rugmaster and Rugmaster Plus central vacuum power nozzles. This motor will work with all older style Beam Rugmaster & Eureka power heads.

This motor replaces:
Eureka CV205 (older models) and Beam Rugmaster Plus (older models).

Don't let your worn down brush strips cause a problem with your power head. These genuine Beam Rugmaster Replacement Brush Strips will fit all Beam Rugmaster or Eureka CV205 models. They are easily installed and will bring new life to your central vacuum system!

The Beam Rugmaster 155451 Wand Old Style  is a solid metal extension wand The 155451 Beam upper wand is the replacement for the Beam Rugmaster wand.

Replacement Beam Rugmaster central vacuum power head wheel.

Service note: When using this wheel for a Beam Advocate power nozzle you will have to remove 1/4" from the post that holds the wheel in place on the nozzle base to get it to lock in place; the original wheels have been discontinued.

Genuine Beam Serenity central vacuum power nozzle belt.

Will work on the following power nozzles: Beam Serenity, Canavac Performance, Eureka Zuum, Vacuflo Edge, Wessel Werks EBK340, and EBK360.

Easily replace the Beam Solaire Bottom Plate. This is a genuine Beam replacement part made for the Beam Solaire. This part will clip in where broken bottom plate is.

***Service Tip: If you hover you cursor over the picture and your old bottom plate has five tabs (Imperial and Advocates) you will need to shave off the center tabs of the replacement plate, and then half off of the outer half of the tabs next to the center most tabs for the new plate to fit. The five tab plate has been discontinued.***

Replacement Beam Solaire LED PC Board with wire for the Beam Solaire central vacuum power nozzle. This particular PC board is located within the housing and can be replaced by a do-it-your-selfer.

Rear Wheels for the Beam Solaire and Advocate central vacuum power nozzles. Will also work on Electrolux EXL103A, EXL1250,  EXL1350, Eureka E1403EZS, ECP700E, ECP750E, and Honeywell HL102A models as well.These are genuine Beam central vacuum parts.

Beam Swivel Neck 155459 for Rugmaster Plus, Classic 1, and Eureka CV205 central vacuum power nozzles.  Exact replacement part for your Rugmaster plus central vacuum power head.  Made from durable plastic.

This replacement Central Vacuum Power Head Base (black) fits EBK360 power heads, Wessel-Werk, Canavac, and other versions of various brands. If you are unsure if this is the part you need, feel free to contact us at Central Vacuum Direct.

This product is No Longer Available. Please call us at (855)649-7996 to discuss your replacement options.

15 Watt headlight for Beam Rugmaster Plus 045389 central vacuum power nozzle and many more.

This replacement brush roll fits EBK360 power heads; Wessel-Werks, Canavac, Zuum and other various brands use this head. If you are unsure if this is the part you need, feel free to contact us. In stock at Central Vacuum direct.

This power nozzle cover that comes in black is designed to fit the model EBK360 central vacuum power head made by Wessel Werks for Canavac, Vacuflo, Eureka, VacuMaid, Airflo and other various brands. If you are unsure if this is the part you need, feel free to contact us.

This genuine height adjustment assembly fits the model EBK360 central vacuum power head made by Wessel Werks for Canavac, Vacuflo, Eureka, VacuMaid, Airflo and other various brands. If you are unsure if this is the part you need, feel free to contact us.

This genuine Wessel Werks central vacuum power nozzle motor fits the model EBK360 power head. Wessel Werks made this power nozzle for many brands throughout the years. If you are unsure if this is the part you need, feel free to contact us.

This replacement quick change direct connect neck assembly fits all EBK360 central vacuum power heads made by Wessel Werks. Will fit EBK360 central vacuum power nozzles from AirVac, Cana-Vac, CycloVac, Eureka, Vacuflo, VacuMaid, and other various brands. If you are unsure if this is the part you need, feel free to contact us.

This replacement rear wheel fits EBK360 power heads, Wessel Werk, Canavac, and other versions of various brands. If you are unsure if this is the part you need, feel free to contact us.

Felt wheel washer for Beam Rugmaster Plus 045389, Rugmaster with switch 045320, and Butler power head 045330.

Get the extension you need to clean in those dark, dirty corners and ceiling fans beyond reach. This central vacuum extension wand is standard fit and will work with almost any vacuum or central vacuum.

This common 120V on/off power switch will work on the following central vacuum power nozzle models:
Beam - BM1365, BM1386, Beam Aero III, Butler, Classic, Rugmaster, and Rugmaster Plus
Eureka - CV190A and CV205
Nutone - 599
M&S Filtex - MS1199

Genuine wooden Beam Rugmaster brush roll is designed to be used with the Beam Rugmaster and Eureka power heads. The replaceable brushes make it easy and cost effective to keep cleaning your home efficiently!

Fits all Beam Rugmaster Models, Eureka CV205, and Honeywell model 045320. Replace every 3-5 years to maintain optimum cleaning efficiency.