|
|
|
|
|
|
|
|
|
|
|
Felt wheel washer for Beam Rugmaster Plus 045389, Rugmaster with switch 045320, and Butler power head 045330.
|
Replacement Foot Pedal Release for Beam Aero III, Butler, and Classic model power nozzles. Will also work with M&S MS1199, Nutone 399, and other power heads.
|
Genuine Beam 5.7" rubber motor gasket. This will fit many Beam, Electrolux, Frigidaire, and Honeywell central vacuum models. Click for a list of compatible models that this will work with. Available from Central Vacuum Direct.
|
|
|
|
|
|
|
|
|
|
|
|
|
Genuine Beam plastic exhaust extension with reducer.
Will fit the following models: Beam - 375C, SC225, and SC275 Ecopure - 375 and 201 Electrolux - PU3450A and PU3650B Frigidaire - PU325A Honeywell - H503A
|
15 Watt headlight for Beam Rugmaster Plus 045389 central vacuum power nozzle and many more. Available from Central Vacuum Direct.
|
Genuine Beam Rugmaster Belt will fit many Beam and Eureka power heads. Replacing the belt helps increase the drive ability of your brush roll which, in turn, keeps your floors and home cleaner. The manufacturer recommends replacing the belt every 6 months to ensure optimum performance. Available at Central Vacuum direct.
|
|
|
|
|
|
|
|
|
|
|
|
|
Genuine Beam anti vibration upgrade kit for power units. Designed to be used with the mounting bracket to reduce the vibration of your central vacuum main unit.
Will fit all Beam, Electrolux, Frigidaire, and Honeywell central vacuums.
|
Genuine Beam 120V power switch.Will fit the following models: Beam - 153, 167, 168, 177, 189, 197, 199, 225, 275, 371, 387, 395, 397, 677, 725, 750, 775, 875, 2089, 2100, 2150, 2220, 2240, 2250, 2725, 2775, and 2875 Honeywell - 4B-H802 Available from Central Vacuum Direct.
|
Genuine Beam wiring harness assembly. Will fit many popular Beam, Electrolux, Eureka, Frigidaire and PowerStar Central Vacuum units. Click for a detailed list of model numbers that this is found in. Available from Central Vacuum Direct.
|
|
|
|
|
|
|
|
|
|
|
|
|
Genuine BEAM control module/SUI board.
Will fit the following models:
- BEAM 375C, PU201A, PU503A, SC200A, SC200B, SC225A, SC2225C, SC225C, SC275A, SC275C, SC295A, SC295C, SC300A, SC325A, SC325C, SC375A, SC375C, SC395A, SC395C
- Ecopure 201, 375
- Electrolux 3450A, PU3450A
- Eurerka CV5500, CVMini
- Imperium BM186A
Manufacturer Part Number: 100601
|
Replacement wheel for central vacuum power nozzles. Replacement wheel will easily snap into place on the old power nozzle.
Will fit the following models:
- BEAM Aero III, Butler, RugMaster
|
Replacement Beam Rugmaster Upper Wand for the Beam Rugmaster Power Team series. Don't let your power team go to waste, simply repair the broken parts and be on your way! Available from Central Vacuum Direct.
|
|
|
|
|
|
|
|
|
|
|
|
|
Genuine Beam central vacuum wall mounting bracket. Will work for all Beam, Electrolux, and Honeywell power unit models.
|
Consider it a deadbolt against dust. With its anti-allergenic micro-filtration that removes fine dust down to 1 micron, this two-layer filter provides you with a breath of fresh air. Easy to install, no glue or tools required.
|
Get the extension you need to clean in those dark, dirty corners and ceiling fans beyond reach. This central vacuum extension wand is standard fit and will work with almost any vacuum or central vacuum. Available from Central Vacuum Direct.
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement Beam Advocate and Solaire Belt. Will work on select Electrolux, Eureka, and Honeywell power nozzles as well.This genuine Beam Advocate belt is geared and reinforced.
|
Black Atlis intake bag adapter for Beam 165, SC300, Electrolux PU3450, Frigidaire CVS4100, and Honeywell H603A central vacuum models.
|
Intake kit for Honeywell H403, H503, H703, H803, and H902 models.
|
|
|
|
|
|
|
|
|
|
|
|
|
Rear Wheels for the Beam Solaire and Advocate central vacuum power nozzles. Will also work on Electrolux EXL103A, EXL1250, EXL1350, Eureka E1403EZS, ECP700E, ECP750E, and Honeywell HL102A models as well.These are genuine Beam central vacuum parts.
|
Easily replace the Beam Solaire Bottom Plate. This is a genuine Beam replacement part made for the Beam Solaire. This part will clip in where broken bottom plate is. ***Service Tip: If you hover you cursor over the picture and your old bottom plate has five tabs (Imperial and Advocates) you will need to shave off the center tabs of the replacement plate, and then half off of the outer half of the tabs next to the center most tabs for the new plate to fit. The five tab plate has been discontinued.***
|
Genuine Beam Rugmaster new style 2 prong cord for your Beam Rugmaster Plus central vacuum power nozzle. Cord installs into the Beam power head then connects to the extension wand.
|
|
|
|
|
|
|
|
|
|
|
|
|
Keep your Beam central vacuum running at peak performance with the Beam Central Vacuum 6 Gallon Bags. These bags are designed to work with your Beam central vacuum system flawlessly, helping you keep a cleaner, healthier home for your family. There are 3 bags per package.
|
Package of 3 genuine Eureka CV Series central vacuum bags for Eureka central vacuum systems. These bags remove 97.8 percent of dust and allergens, helping to keep your home clean and healthy.
Will fit the following Eureka central vacuum models: CV3120F, CV3121H, CV3291L, CVS5000, CV5500, CVS6000, CV6500i, CVS7000
|
Genuine Eureka Powerline central vacuum bags, 3 per package. Will fit the following models: Beam - 165, BU160, and PU300A Eureka - CV107H, CV137H, CV1001, CV1004B CV1601, CV1801, CV1804, CV1810, CV2301, CV550QA, and CVS4000 Honeywell - 4B-H603
|
|
|
|
|
|
|
|
|
|
|
|
|
Honeywell 110056 Central Vacuum 6-Gallon disposable Paper Bags (3-Pack). Replacement bags for Honeywell model 4B-H503, 4B-H602, 4B-H603, and 4B-H703 central vacuum units. Available from Central Vacuum Direct.
|
This 100701 replacement control module with LED butons fits the following models: - Honeywell H750A
- Eureka ECV5400
- Electrolux ZC910
|
Genuine Beam Solaire power head neck for the new style Beam Solaire central vacuum power head. It is oval at the top and uses the "Sumo" attachment fitting, as opposed to the old round universal size Beam Solaire.
|
|
|
|
|
|
|
|
|
|
|
|
|
Genuine Beam 120V power cord for central vacuum main units. Will fit the following Beam models: 153, 167, 168, 177, 189, 193, 197, 199, 204, 287, 297, 298, 371, 387, 725, 750, 775, 875, 2100, 2150, 2220, 2240, 2250, 2725, 2775, and 2875. Available from Central Vacuum Direct.
|
Replacement PC Board for Beam Solaire SL100 A,B,C 045055. This PC board can be replaced easily.
|
Replacement Beam Solaire LED PC Board with wire for the Beam Solaire central vacuum power nozzle. This particular PC board is located within the housing and can be replaced by a do-it-your-selfer.
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement Beam Solaire Cogged Belt 2 pack for the Beam Solaire power head at Central Vacuum Direct. Cogged belts last a lot longer than normal rubber belts and can last up to two years without needing replacement.
|
Changed to new #60858-1 or #155528. Fits all Beam Butler Power Nozzles. Models BM1195 and BM1197.
|
Genuine replacement brushroll for the Beam Solaire central vacuum power nozzle. This brushroll has high quality bristles that deeply agitate carpet for a cleaner home.
|
|
|
|
|
|
|
|
|
|
|
|
|
Base assembly for Beam; Aero, Butler, and Classic, Eureka CV190A, Nutone 599, and M&S Filtex MS1199 Power Heads
|
Genuine Beam Q sumo fitting telescopic central vacuum wand. Will fit the following central vacuum power nozzle models: Beam - Q100 (045056,) SL100 (045055) Electrolux - EL7, EL10, EL12, EL13A, ELUX1600 EXL103A,EXL1250, EXL1350, and Quiet Clean (045059) power nozzles Eureka - E1403EZS, ECP700E, ECP750E, and EL101A Honeywell - HL102A
|
Genuine 14" blue Beam cleanstream filter for central vacuums. Recommended to be replaced every 5 years. Will fit the following models: Beam - 297, 397, 2220, and 2240 Electrolux - PU3900 Honeywell - 4B-H902 Powerstar - PS805 and PS905 Available from Central Vacuum Direct.
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement Beam Advocate and Solaire Motor power nozzle. Motor has a geared axle for a cogged belt and is very easy to change out. Homeowners with very basic do-it-yourself skills can easily repair this power head. Old manufacturers part number was 155209. Available from Central Vacuum Direct.
|
Genuine Beam 11" blue cleanstream central vacuum filter. Will fit the following central vacuum models: Beam - 183, 186, 2089, BM185, BU180, and BU185 Electrolux - BM186A, PU3605B, and SC200EFrigidaire - FCV185S, PU101A, and PU325A Honeywell - 4B-H403B
|
Genuine Beam 11" central vacuum cloth filter. Previous manufacturers part numbers have been 110347, 110379, and 110830 Will fit the following central vacuum models models: Beam - 153, 178, 189, 193, 197, 199, 275, 275A 750, 775, 2100, 2775, PU275, PU353, PU371, PU501, PU601, PU701, and SC375A
Honeywell - H503A and H703A
|
|
|
|
|
|
|
|
|
|
|
|
|
Genuine Honeywell 14" replacement filter bag for H802 and H803 models. Will also fit the AirVac AVR7500, and Dustcare DCC4 and DCC5 Models.
|
Replacement Beam new style motor for Aero II, Butler, Classic, and Rugmaster Plus central vacuum power nozzles. This motor will work with all newer style Beam Rugmaster Plus & Eureka Power Heads. Available now at Central Vacuum Direct.
|
Genuine 11" replacement filter bag. Fits: Honeywell H402A and H403 units.
|
|
|
|
|
|
|
|
|
|
|
|
|
Genuine Beam printed circuit board (PCB) #100630. Will fit the following models: Beam 225A and SC325A Frigidaire BM166, CVS4100, and CVS6100 Honeywell 4B-H503 Electrolux BM166A and PU503A
|
Replacement circuit board #100562 for Beam central vacuum systems. This PC board kit comes with all the necessary wiring and plugs to change your existing central vacuum PC board. will fit the following models: Beam - 2150 Eureka - CV1001F, CV1001G, and CV1004 Honeywell - 4B-702 and 4B-H802
|
Genuine Beam 11" cleanstream filter. Recommended to be replaced every 5 years to maintain optimum performance. Will fit the following models:
Beam - 2775, PU275A, SC275, SC375, SC380, SC3700 Electrolux - 4500, PU3450
|
|
|
|
|
|
|
|
|
|
|
|
|
Genuine Beam 11" blue cleanstream filter for central vacuums. Will fit the following models: Beam Private Labeled Units (PU) - PU501, PU601, and PU701 Frigidaire - 460FRIG
Honeywell - 4B-H502, 4B-H503, 4B-H702, and 4B-H703
|
Genuine 14" Frigidaire filter for central vacuums. Will fit the following models: Eureka - CVS5000, CVS6000, and CVS7000 Frigidaire - CVS6100, CV7100, F200, F300, FCV212S, FCV315S, FCV460S, FCV520S, FGCV212SQ, FGCV315SQ, FGCV319SQ, FGCV460SQ, FGCV520SQ, FGCV550SQ Honeywell - 4B-H602
|
Genuine Lamb 2-stage, 120V central vacuum motor.
Will fit the following models:
- BEAM 145, BM165, BM185, BM285A, BU165, SC200A, SC200B, SC220C
- Electrolux BM166A, CV312K AIO, CV312L/8701, CV3121M
- Eureka CV3021A, CV3120G, CV3121J, CV3121N, CV5500, CV5500A, CV900A AIO, CV-Mini
- Frigidaire BM166A, FCV165S, FCV185S
- Honeywell 4B-H403A, 4B-H403B
- Imperium BM186A
- PowerStar PS405
Specifications:
- Volts - 120
- Fan Stages - 2
- Air Seal - No
- Double Insulation - No
- Type - Bypass
- Discharge - Tangential
- Fan Diameter - 5.7"
- Epoxy Paint - No
- Bearings - Double Ball
Motor Performance:
- Watts - 1400
- Sealed Vacuum - 110"
- Max Air Watts - 550
- Max Airflow - 120 CFM
Manufacturer Part Number: 140434
|
|
|
|
|
|
|
|
|
|
|
|
|
This genuine Beam central vacuum printed circuit board fits will fit the following models: Beam - 725, 750, 775, and 875 Eureka - CV1804A Honeywell - 4B-H402A and 4B-H304A Available from Central Vacuum Direct.
|
Common Beam 120V PCB for single motor units. This circuit board will fit many popular central vacuum models. Click to see model numbers that this is compatible with. Available from Central Vacuum Direct.
|
Genuine Beam central vacuum printed circuit board (PCB) 100629. Will fit the following models: Beam - 275A, 295, 395, SC375A, SC398, and SC3900A Electrolux - PU3450, PU3600, PU3900, SC200E, and SC3700 Frigidaire - PU325A and SC325 Honeywell - 4B-H403, 4B-H603, 4B-H703, and 4B-H803 Powerstar - PS405, PS505, PS705, and PS805
|
|
|
|
|
|
|
|
|
|
|
|
|
Genuine Lamb two stage bypass motor. This common motor will fit many central vacuum models, click to see a full listing. Available from Central Vacuum Direct.
|
Genuine Beam 240V printed circuit board (PCB) for 2 motor central vacuum units. Will fit the following models: Beam 697, 2500, 2900, and SC3500 Honeywell - 4B-H902 PowerStar - PS905
|
Genuine Lamb 2 stage 120V bypass central vacuum motor. Previous part numbers have been 119992 and 140373. Click to see which makes and models that this popular central vacuum motor fits into. Available at Central Vacuum Direct.
|
|
|
|
|
|
|
|
|
|
|
|
|
Genuine Lamb 120V central vacuum motor.
Will fit the following models:
- BEAM 145, 185, BU185
- Eureka CV100A
Specifications:
- Volts - 120
- Diameter - 5.3"
Manufacturer Part Numbers: 140506, 112878-22 Replaces Part Number: 140347
|
Genuine Lamb 240V 2 stage central vacuum motor assembly.
Will fit the following models: Honeywell - 4B-H902 PowerStar - PS905
|
Genuine Lamb 120V all metal 2 stage bypass central vacuum motor. Previous part numbers were 140233 and 140234. Will fit the following models: Beam - 287, 387, 875, and 2875 Electrolux - CV3391D Eureka - CVS7000 Honeywell - 4B-H802 Silent Master - SP2 and SP22
|
|
|
|
|
|
|
|
|
|
|
Genuine Lamb 2 stage 120V large meta central vacuum motor. Previous part number was 122031.
Will fit the following models: Beam - 295, 395, and SC3900A Electrolux - PU3900 Honeywell - 4B-H803
|
The Beam SL100 Solaire Power Head works well for dense carpeting. Great looking and ultra quiet this powerhead has the features you'll love. Will fit Beam attachments kits that use the Sumo "D" shaped fitting. Available from Central Vacuum Direct.
|
|